![background image](http://html1.mh-extra.com/html/la-fitness/dk900eaj01aa/dk900eaj01aa_owners-manual_3108442022.webp)
21
2012/3/8Ver1.4+Ver1.1
The scrolling text
『
DISTANCE COVERED =
』
, then
『
ML= 0.0
』
The scrolling text
『
AVERAGE SPEED =
』
, then
『
MLH= 0.0
』
The scrolling text
『
CALORIES BURNT =
』
, then
『
KCAL= 0.0
』
The scrolling text
『
AVERAGE WATTS =
』
, then
『
WATTS= 0.0
』
The scrolling text
『
AVERAGE METS =
』
, then
『
METS= 0.0
』
V. Engineering Setting
1.
Under Start/Ready status, hold "CLEAR" and "0" for 3 seconds and the LED will display
『
FACTORY SETTINGS
』
. Then you can press ENTER key to enter the NITS selection. (It
cannot be revised now). Then you can press LEVEL Up/Down to select the item to be detected,
or Stop key to abort the changing and return to the Start/Ready status.
1-1.
Machine type: The text will display
『
MACHINE TYPE = B
』
. The showing code is as:
B is Bike, R is Recumbent and E is Elliptical.
1-2.
Edition Date: The text will display
『
VER = 0.1 / 2008.09.15
』
. 0.1 is the edition number
and the latter is of year, month and date.
1-3.
Gear ratio: The text will display
『
GEAR RATIO= 8.3
』
. The displayed 8.3 is the ratio
between stepping speed and motor rotate.
1-4.
Multi-language: The text will display
『
LANGUAGE = ENGLISH
』
. There are totally 7
languages: SPANISH
→
DUTCH
→
PORTUG
→
ITALIAN
→
FRENCH
→
DEU
TS
CH
→
ENGLISH
→
SPANISH.
1-5.
Sleep Mode: Computer LED window displays
『
POWER = OFF
』
. When you set
Power=ON, then the product will not enter “off” status and the computer will keep
staying in Start/Ready status. When you set Power=OFF, then if there is no RPM
signal for 20 seconds probed by the computer, and the product will turn off
automatically.
1-6.
Units Setting: The text will display
『
UNITS= METRIC
』
. They are divided into:
METRIC and IMPERIAL.
1-7.
Exercise Time: The text will display
『
WORKOUT TIME= 10
』
. Range:0~60mins. When
you set it as 0, there will be no limit.
1-8.
Pause Time: The computer LED window displays
『
PAUSE TIME= 20
』
. The range is
0~20 seconds. When you set at 0, then it means there is no time limit. This function is to
set the time from the moment the computer receives no signal to sleep mode under any
program control mode
2.
Service Mode: Under engineering setting, press " 1" and you will enter
【
SERVICE
MODE
】
.Then press "ENTER" to start testing each item. After testing one item, press "ENTER"
to test another item. After testing all the items, the machine will return to the Start/Ready status.
While testing, you can also press "STOP" to return to the Start/Ready status.
2-1.
Initial picture of the service mode: The text will display
『
PRESS ENTER
』
.