LA Fitness 15 Neon II, Руководство пользователя

Страница: 7 / 39

6
SET UP INSTRUCTIONS
Place the ELLIPICAL in the area where it will be used. The max. operation dimensions of ELLIPTICAL
are approximately 58 1/4” long x 24 3/4” wide x 61 tall. (These dimensions may very up to one inch.)
An area 4 feet wide x 7 feet long is required for safe operation of the ELLIPTICAL. Make sure that
adequate space is available for access to and passage around the ELLIPTICAL.
LEVELING: Adjust the LEVELING CAPS(60) on the REAR STABLIZER(2) so that the elliptical sets on
the floor without rocking. Remove and reposition the LEVELING CAPS(60) on the REAR
STABLIZER(2) to level the ELLIPTICAL.
MOVING: The ELLIPTICAL has a pare of MOVING WHEELS(58) built into the FRONT STABLIZER(3)
at the front. Grasp the center section of the HANDLEBARS(8,9) and tip the ELITE ELLIPTICAL
forward to move.
GRAS P HERE TO MOVE
GRAS P HERE TO MOVE
FUNCTION INSPECTION:
Visually inspect the ELLIPTICAL to verify that assembly is as shown in the above illustration.
Check the function of the ELLIPTICAL. Stand on the foot pedals and place your hands at a
comfortable position on the handlebars. Slowly move your highest foot forward and follow the natural
path of the machine. Turn the crank slowly through one complete revolution to verify that the drive
train functions properly. Use the “+/-“ buttons on the COMPUTER(38) to select a program and verify
that the Magnetic System provides different tensions.