La Crosse Technology, Ltd.
Page 6
MONTH: The
Month
will flash. Use the PLUS button to select the Month. Press and release
the SET key to confirm and continue.
DATE: The
Date
will flash. Use the PLUS button to select the Date. Press and release the
SET key to confirm and continue.
°F/°C TEMPERATURE:
°F/°C
will flash. Use the PLUS button to select the °F or °C. Press
and release the SET key to confirm and exit the manual settings.
Note:
When no buttons are pressed for ten seconds, the Forecast Station will save the last
change and default back to normal mode.
12/24 hour time
Displays the time in 12-hour or 24-hour format.
Default is 12-hour time.
Use the
Program Menu
to switch time formats.
Read the Moon Phase
All phases of the moon are present on the display.
The bar above the moon phases will indicate the current moon phase.
Forecast icons are incorrect.
Forecast icons such at sun, sun with clouds, and clouds with rain are predicting what the
unit will see 6-12 hours in the future-- not what the you see currently out the window.
All forecasting is 75% accurate.
•
Sun means pressure is raising and weather should be improving not that it would be
sunny.
•
Sun with clouds means pressure is steady.
•
Clouds with rain mean pressure is falling not that the unit will have rain or snow.
Dashes, OFL, or Stuck Indoor Temperature
This is generally a power related issue.
may be overpowered or underpowered. Remove batteries from temperature
station.
Press any button 20 times. Leave the temperature station unpowered for 1-2 hours.
Insert fresh alkaline batteries with correct polarity.
If the indoor temperature is still dashes or OFL, the temperature station may need
replacement.
Inaccurate Indoor Temperature Reading
Side-by-side test
: Bring the outdoor transmitter in the house and place it next to the
temperature station for 2 hours.
Compare indoor and outdoor temperature. The temperature should be within 4 degrees to
be within tolerance. See the section on
accuracy
for details.
Look for heat sources such as sunlight, door or window frames, or reflected heat of cold.
Temperature station Has Missing Segments
This is generally a power related issue.
