![background image](http://html.mh-extra.com/html/minder-research/tempminder-mri-193an/tempminder-mri-193an_owners-manual_1800716001.webp)
TempMinder® WIRELESS COLOUR WEATHER STATION MRI-193AN Owner’s Manual
Thank you for purchasing the new generation colour TempMinder® weather station. Designed and engineered with state of the
art technology and components. This TempMinder® features accurate and reliable measurement of indoor/outdoor temperature
and humidity, Dual Time Clock and a 12 to 24 hour weather forecast.
Overview of set-up:
We have attempted to make the following instructions as user friendly as possible. Please note the list of controls (buttons)
below as well as their location on the TempMinder. Some buttons have dual functions and it is important to understand what
they do and when to use them.
Function
OR
Button Name
Press and Release to:
Press and hold for 3 seconds
On Receiver Top
LIGHT BULB ICON/
Select indoor,
Channel 1,2,3, auto scroll Search for remote sensor
SNOOZE/CHANNEL
Trigger snooze alarm & extend backlight
On Receiver Rear
CLOCK
Display time, calendar and day-of-week Set Clock, Calendar
and change weather
ALARM
Display alarm time, enable/disable alarm Alarm time setting
MEM
Read max/min temperatures & humidity Clear memory record
-/
ZONE
Toggle between Local & Zone times
Set Time Zone or
Single number decrease (Reverse)
Rapid decrease (Reverse)
+
Single number increase (Forward)
Rapid Increase (Forward)
C/F
Toggle between Celsius and Fahrenheit
LIGHT
Turns backlight on or off when receiver is
ON/OFF
plugged in.
AC Power Installation and Battery Installation
Receiver Unit:
For continuous backlight (on), plug the 6.0 V AC/DC into a power source as well as into the rear of the receiver.
Back-up Power: Install 3 AAA Alkaline batteries according to the + and – symbols. This will retain all programs should the unit be
unplugged or experience a power outage.
Remote Sensor: Loosen the two screws on the center rear of the remote transmitter, remove the battery compartment cover,
insert 2 AAA Alkaline (or Lithium) batteries according to the + and - symbols. Leave the battery cover off until completing the
“Setting up the Remote Wireless Transmitter” section below.