28
OUTDOOR TRANSMITTER:
The sensor is supplied with a holder that may be attached to a wall with the two
screws supplied. The sensor can also be position on a flat surface by securing the
stand to the bottom to the transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic anchors.
2. Clip the sensor onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the desired
locations to check that the outdoor temperature readings are receivable. In event that
the signal is not received, relocate the transmitter(s) or move them slightly as this may
help the signal reception.
The mounting surface can, however, affect the transmission range. If for example the unit is attached to a
piece of metal, it may then either reduce or increase the transmitting range. For this reason, we recommend
not placing the unit on any metal surfaces or in any position where a large metal or highly polished surface
is in the immediate proximity (garage doors, double glazing, etc.). Before securing in place, please ensure
that the Weather station can receive the 868MHz signal from the Temperature transmitter at the positions
that you wish to situate them.
