24
2.
Either a “: 12h” or “: 24h” will appear on the LCD. If “: 12h” is displayed then the current time display
is set to 12-hour time. If “: 24h” is displayed then the current time is set to 24-hour time.
3.
To alternate between the two times display mode, simply press the
“RESET/+/MIN/MAX”
key.
4.
When the desired time display is selected, press the
“SET/CHANNEL”
key once more to enter the
Time setting
mode.
Note:
When the time display is set as 12-hour mode, the temperature unit will be set to
°°°°
F; when the time
mode is in 24-hour format, the temperature unit will be set to
°°°°
C.
TIME SETTING:
Following from the 12 or 24 hour setting mode.
1.
The Hour digit in the time section starts flashing
2.
Using the “
RESET/+/MIN/MAX
” key, enter the hours of the current time and then followed by
pressing the
“SET/CHANNEL”
key to move into the minutes mode
3.
Again, using the “
RESET/+/MIN/MAX
” key, enter the minutes of the current time (by holding the key
down, the digits are incremented in steps of five) and then finally followed by pressing the
“SET/CHANNEL”
key to exit the setting mode. Your Temperature Station is now fully operational.
USING THE TEMPERATURE STATION:
INDOOR TEMPERATURE:
The indoor temperature is displayed on the second line of the LCD under the time. The Temperature
Station’s built in sensor automatically measures the temperature once the batteries are inserted.
