9
1.
The year digits will start flashing in the lower LCD.
2.
Press and release the
+
key to select the desired year.
3.
Press and release the
SET
key to confirm the Year setting and continue to the Month
setting.
MONTH SETTING
1.
The month digits on LCD2 will start flashing.
2.
Press and release the
+
key to select the desired month.
3.
Press and release the
SET
key to confirm the Month setting and continue to the Date
setting.
DATE SETTING
1.
The digits for the date will start flashing in the lower LCD (Default setting 1).
2.
Press and release the
+
key to select the desired date.
3.
Press and release the
SET
key to confirm the Date setting and exit the manual setting
mode.
Note:
The date can only be set in conjunction with the selected month. For example, it is not
possible to set the date 30 if the month of February is selected.
EXIT THE MANUAL SETTING MODES
•
To return to the normal display mode from anywhere in manual setting mode simply press
the
ALM
key at anytime.
•
If no keys are pressed for at least 15 seconds in setting mode, the atomic clock will
automatically switch back to normal display mode.
ALARM SETTING
To enter into the alarm setting mode:
1. Hold
the
ALM
key for 5 seconds. The hour digits start flashing.
2.
Press and release the + key to set the hour.
3.
Press and release the
ALM
key to continue to the minutessetting.
4.
The minute digits start flashing.
5.
Press and release the + key to set the minutes.
6.
Press and release the
ALM
key to exit the Alarm setting mode or wait for 15 seconds for the
clock to automatically timeout and return to the standard display mode.
