background image

 

8

 
 

 

2. 

Press and release the 

+

 key to select the desired language. 

3. 

Press and release the 

SET

 key to confirm the language setting and enter the Manual Time 

setting mode. 

 

MANUAL TIME SETTING  

In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting 
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock. 
 
1. 

The hour digits will start flashing in the upper LCD. 

2. 

Select the desired hours by pressing and releasing the 

+

 key. 

3. 

Press and release the 

SET

 key to advance to the minutes setting. 

4. 

Now the minute digits will start flashing. 

5. 

Select the desired minutes by pressing and releasing the 

+

 key. If the 

+

 key is held, the 

units will increase by 5. 

6. 

Press and release the 

SET

 key to confirm the Time setting and continue to the Year setting. 

 

Note: 

The unit will still try to receive the signal every day despite it being manually set. When it does 
receive the signal, it will change the manually set time into the received time. During reception 
attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB 
tower icon will not appear but reception will still be attempted the following hour. 

 

WWVB time reception takes place from 12:00 am through 6:00 am each day (attempts WWVB 
reception every full hour within this  time frame). When the time signal is received for example at 
1:00 am, the atomic clock will not attempt to receive the WWVB signal for the remaining hours 
until 6:00 am. Therefore, the next signal attempt will take place between 12:00 am and 6:00 am 
the next day. The other times WWVB reception takes place, are upon setup and after manual 
time set exiting mode. Reception is generally not possible during daylight hours due to the 
interference of the sun. 

 

YEAR SETTING 

The year can be selected sequentially from 2003 to 2029 and will then start over again (default 
setting 2004). None of the digits of the year will  be visible on the lower LCD display however the 
year must be correct as it affects the day of the week display. 

Содержание WS-8256U






















Отзывы: