5
MANUAL SETTINGS
Note:
If the atomic clock has already successfully received the WWVB time signal and displays
the correct time and date, then the Manual settings can be skipped
.
After completion of the above described procedures in “
Setting up”
the manual setting modes
can be entered by pressing and holding the
SET
key for 5 seconds. The following settings can
now be programmed:
Default
(Factory)
Setting
•
LCD
contrast
setting
4
•
Time zone setting
-5 (Eastern Standard Time)
•
DST
ON/OFF
ON
•
Radio-controlled time ON/OFF
ON
•
Language
display
setting
ENG
(English)
•
Manual time setting (Hour then Minute)
12 (hour), 00 (minute)
•
Year
setting
2004
•
Month
setting
Jan
(January)
•
Date
setting
1
LCD CONTRAST SETTING
After entering the manual setting mode as described above, the LCD contrast can be set between
0 and 7.
1.
Press and hold the
SET
key for 5 seconds.
2.
LCD will be displayed in the lower display and a number will flash to the right of the word
LCD.
3.
Press and release the
+
key to select the desired LCD contrast.
