02
Follow the instructions below to attach the Wind Cups with a mini
screwdriver.
Install the Wind Cups if needed
Remove the Glide Sensor, and Wind Cups,
from the package. Take note of the flat
edges located on the head of the sensor
and underside of the Wind Cups.
Carefully tighten the screw on the side
of the cups using a mini screwdriver. The
screw should tighten into the flat edge of
the post.
Align the flat edges and place the Wind
Cups on top of the sensor.
1.
3.
2.
4.
When the screw is tight, gently pull up on
the cups to ensure they are secure.
If they pull off, start again with step two.
Initial Setup
