3
Insert 3-AA batteries into the Glide Sensor
according to polarity.
1.
Press on and slide down the outer cover.
2.
Lift up and remove the battery cover.
3.
Insert batteries.
4.
Replace the battery cover and outer cover.
Power Up
Glide
Wind Sensor
TX145W
Press and
slide down
Sensor Placement & Mounting
•
Ideally, the sensor should be mounted on the tallest object
in your area. Avoid positioning it parallel or below eaves,
rooflines, trees, or other objects that may obstruct wind
readings.
•
Make sure all the screws on the Mounting Bracket, Wind Cups,
and Battery compartment are securely fastened.
•
The sensor should be mounted with the Wind Cups on top.
•
To optimize battery life, ensure the Solar Panel is facing
the sun. The Solar Panel alone will not operate the sensor,
batteries are required.
•
•
The maximum wireless transmission range to the station is up
to 330ft (100m) in open air. This does not include walls, floors,
or other large obstructions.
See page
02
for wind cup installation information.
For Accurate Glide Sensor Measurements
