2
ALARM ACTIVATION:
•
Press and release the ALARM button once to show Alarm Time.
•
Press and release the ALARM button repeatedly to activate or deactivate the
Alarm. The
alarm icon appears when alarm is activated.
SNOOZE:
•
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9
minutes. The snooze icon
Zz
will flash when the snooze feature is active.
•
To stop alarm for one day, press AL button, while in snooze mode. The alarm
icon will remain solid.
•
Note
: When the alarm sounds, it continues for 2 minutes and then shuts off
completely.
•
USB CHARGE PORT:
When operating on a/c power, you may charge a device from the back of the
display.
Note:
This is a power output port only. The Color Atomic Alarm Clock cannot be
powered via this port.
•
Connect the USB charge cord for your device
to the port on the back of the Color Atomic
Alarm Clock and let charge. Charge times will
vary.
•
Output
: 1A maximum current USB.
•
Do not overload USB port.
Note:
Check that your device will charge with the USB cord it came with. Many USB
cords are for data transfer only, and cannot be used for charging.
MIN/MAX TEMPERATURE/HUMIDTY DATA:
This station will show the daily
minimum and maximum temperatures each day starting at midnight (12:00 AM).
The station automatically resets the min/max temperatures at midnight (12:00 AM).
VIEW MIN/MAX:
•
MAX:
From a normal display press and release the MEM button once to view
maximum temperature and humidity values for indoor and outdoor data.
•
MIN:
From a normal display press and release the MEM button twice to view
minimum temperature and humidity values for indoor or outdoor data.
RESET MIN/MAX
: Hold the MEM button for 5 seconds to reset all min/max values.
HEAT INDEX:
Heat Index combines the effects of heat and humidity. It is the
apparent temperature of how hot it feels to a human being.
Note:
Heat index will be the same number as the
temperature until the temperature is above 80 degrees ° F
(26.7° C).
•
INDOOR/ OUTDOOR:
From a normal display press the HEAT/DEW button once
and Heat Index will show instead of the ambient temperature.
DEW POINT:
Dew point is the saturation point of the air, or the temperature to
which the air has to be cooled in order to create condensation.
Note:
Dew Point generally is lower than the temperature.
•
INDOOR/ OUTDOOR:
From a normal display press
the HEAT/DEW button twice and Dew Point will show instead of the ambient
temperature.
WEATHER FORECAST ICONS:
The unit predicts weather condition of the next 12-hours based on the change of
atmospheric pressure. The weather forecast is based on atmospheric pressure
change and is about 70-75% correct. As weather conditions cannot be 100%
correctly forecasted we cannot be responsible for any loss caused by an incorrect
forecast.
LOW BATTERY:
•
When this icon appears in the Indoor reading section the batteries in the display
need to be replaced.
•
When this icon appears in the outdoor readings section, replace the batteries in
the outdoor transmitter.
CARE AND MAINTENANCE:
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Do not expose the display to extreme temperatures, vibration or shock.
•
Keep display dry.
•
Clean display with a soft damp cloth. Do not use solvents or scouring agents.
•
The product is not a toy. Keep it out of reach of children.
•
The product is not to be used for medical purpose or for public information, but is
determined for home use only.
•
The specifications of this product may change without prior notice.
•
Improper use or unauthorized opening of housing will void the warranty.
•
If the unit does not work properly, change the batteries and/or check the a/c cord
connection.
SPECIFICATIONS:
Indoor
:
Temperature Range:
+32°F to +122°F (0°C to 50°C)
Humidity Range:
1%-99% (RH)
Interval:
About every 30 seconds
Outdoor
:
Range:
temperature, dew point, heat index
-40°F to 140°F (-40°C to 60°C)
Alkaline Batteries: -20°F to 140°F (-28.8°C to 60°C)
Lithium Batteries: -40°F to 140°F (-40°C to 60°C)
Temperatures below - 20°F (-28.8°C)
require Lithium batteries in the outdoor sensor.
Humidity Range:
1%-99% (RH)
Distance:
200 ft. (60 meters) RF 433MHz (open air)
Interval:
About every 50 seconds
Power:
Receiver:
5-volt a/c power adapter (included)
Optional 3-AA, IEC, LR6 batteries (not included)
Transmitter:
2-AA, IEC, LR6 batteries (included).
USB:
Output:
1 Amp maximum current
Battery Life:
Battery life is over 24 months when using reputable
battery brands for both Alkaline and Lithium batteries
Dimensions:
Receiver: 5.9” L x 2.36” W x 5.9” H (150 x 60 x 150mm)
Transmitter: 2.5” L x 1.42” W x 3.98” H (64 x 36 x 101mm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product
against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on
products purchased and used in North America and only to the original purchaser of
this product. To receive warranty service, the purchaser must contact La Crosse
Technology, Ltd for problem determination and service procedures. Warranty
service can only be performed by a La Crosse Technology, Ltd authorized service
center. The original dated bill of sale must be presented upon request as proof of
purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized
service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no
charge as stipulated herein, with new or reconditioned parts or products if found to
be defective during the limited warranty period specified above. All replaced parts
and products become the property of La Crosse Technology, Ltd and must be
returned to La Crosse Technology, Ltd. Replacement parts and products assume
the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse
Technology, Ltd will pay all expenses for labor and materials for all repairs covered
by this warranty. If necessary repairs are not covered by this warranty, or if a
product is examined which is not in need or repair, you will be charged for the
repairs or examination. The owner must pay any shipping charges incurred in
getting the La Crosse Technology, Ltd product to a La Crosse Technology, Ltd
authorized service center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused by
accident, unreasonable use or neglect (including the lack of reasonable and
necessary maintenance); (2) damage occurring during shipment (claims must be
presented to the carrier); (3) damage to, or deterioration of, any accessory or
decorative surface; (4) damage resulting from failure to follow instructions contained
in the owner’s manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse Technology, Ltd
authorized service center; (6) units used for other than home use (7) applications
and uses that this product was not intended or (8) the products inability to receive a
signal due to any source of interference.. This warranty covers only actual defects
within the product itself, and does not cover the cost of installation or removal from
a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-
related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR
PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights
specific to the State. Some States do not allow the exclusion of consequential or
incidental damages therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is available at:
www.lacrossetechnology.com/c86371
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
This Device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
the device must accept any interference received, including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO
OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this
handbook is regularly checked and corrections made in the next issue. We accept
no liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
This device complies with Industry Canada RSS-210. Operation is subject to the
following two conditions: (1) this device may not cause interference, and(2) this
device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Battery
Cover
