Refresh mode (the battery is
being discharged)
Discharging current: 250 mA
Note:
z
By pressing the MODE key within 8 seconds after inserting the rechargeable batteries,
the Refresh mode can be selected. (The mode key shall first be pressed and held for
about 1 second to activate the mode change. The subsequent pressing of the mode key
will enable to toggle between the “Charge”, “Discharge”, “Test” and “Refresh” mode.)
Then user may also select different discharging current by pressing the CURRENT key
(see “Note” in Discharge mode and Table 2), within 8 seconds after inserting the
batteries. (Or the display will blink once to indicate the end of setting and the current
cannot be changed afterward.)
z
It may take up to several days to finish the refreshing process, depending on the
selected discharging current.
z
The maximum refresh current is 350 mA.
41
