IGNITION – ADJUSTMENTS
39
Notice d’installation ligne “Cornuchef” Centenaire - GB
08NOTINSTGSC100/GB-4
Injectors table
All the adjustments and replacement of injectors or bypass screws must be
carried out by a qualified professional.
The part numbers of the injectors for the various hot top burners (see locations on the
diagram page 33) differ, depending on the type of gas and country of installation.
The following table defines which injector and bypass screw should be used if the type of
gas is changed or if you move.
Injectors table:
Country:
CAUTION : the BY-PASS screws are adjusted for natural gas G20 - 20 mbar and G25 - 20 / 25 mbar
For BUTANE / PROPANE gas G30 / G31 - 28 / 30 / 37 mbar - Screw the by-pass to the maximum
For BUTANE / PROPANE gas G30 / G31 - 50 mbar - Change the by-pass screws and screw to the maximum
6. I
NJECTORS TABLE
AT : Austria
BE : Belgium
CH : Switzerland
CY : Cyprus
CZ : Czech Republic
DE : Germany
DK : Denmark
EE : Estonia
ES : Spain
FI : Finland
FR : France
GB : United Kingdom
GR : Greece
HR : Croatia
HU : Hungary
IE : Ireland
IT : Italy
LT : Lithuania
LU : Luxembourg
LV : Latvia
NL : Netherland
NO : Norway
PL : Poland
PT : Portugal
RO : Romania
SE : Sweden
SI : Slovenia
SK : Slovakia
TR : Turkey