39
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Back of range showing fl ue extensions in the correct position.
Leveling
Place the range in its intended position taking care
not to twist it within the gap between the kitchen
units as damage may occur to the range or the
units. Install the oven racks in the oven. Check for
levelness by placing a level or a cup, partially fi lled
with water, on one of the oven grids. If using a
spirit level, take two readings-with the level placed
diagonally fi rst in one direction and then the other.
The rollers can be adjusted to level the range. To
adjust the height of the rear of the range use the
leveling tool supplied to turn the adjusting nuts at
the front bottom corners of the range.
Adjust the height of the front roller to level the
range. Turn clockwise to raise the range and
counter clockwise to lower.
Use the Allen key tool (supplied with range) to turn
the center roller lowering mechanism (C in the fi g.
below).
A
left rear roller,
B
right rear roller,
C
center roller
When you are satisfi ed with the height and level,
raise the front of the range by one turn of the
front roller adjuster. Screw down the front feet
to meet the fl oor. Screw the front roller adjuster
counterclockwise to raise the front roller so that the
front of the range is supported on the feet, not the
front roller, to prevent accidental movement of the
range.
Leave the leveling tool in the storage drawer, so
that it available if it necessary to more the range for
maintenance.
