La Cimbali M200, Руководство инженера

Страница: 57 / 102

English
52 EN
English
Wi-Fi configuration
Wi-Fi Menu
-
configure the following Wi-Fi settings as shown below:
- CONNECT - to connect to the access point selected.
- RSSI - signal intensity:
Values of less than -70 dB indicate poor coverage with probable difficulty in transmitting data.
- IP - displays the IP address assigned to the machine by the wireless access point.
- MAC - indicates the Mac address of the machine Wi-Fi module. This parameter is read-only and cannot be modified.
- NETWORK - enter the name of the access point.
- SECURITY - indicate the type of wireless network security:
Open: no protection;
WPA : wpa2-psk protection;
WEP: WEP 128 protection.
- KEY - enter the password to access a protected Wi-Fi network (WPA or WEP)
- URL -
enter listener.gruppocimbali.com.
- Port -
enter
61618
.
- fTX - reduces data traffic to the remote server:
- transmits all data daily upon machine start-up, and faults/washings when they occur;
- as per level 1 plus hourly counts;
-
as per level 2 plus pings every 10 min. (default);
- as per level 3 with the addition of sending information on coffee dispensing and washing.
- RESET - To restore the parameters to the standard parameters.
Bluetooth Card
Bluetooth Connection
Bluetooth Menu - The parameters that can be set are:
- MM1-MM2 - 1 to 2 grinders can be connected.
- Search - the machine will find all Bluetooth devices within 10 m.
- Reset - cancels the connection with the associated device.
Note: during connection with bluetooth grinders/dispensers, the first one connected is set as MM1.