La Cimbali M200, Руководство инженера

Страница: 56 / 102

English
51 EN
English
Payment systems
- allows a payment system to be
configured, when connected.
SOFTENER REGENERATION -
Includes the parameters
for softener regeneration: litres of softener (between 0.1L
and 25L), hardness (between 0 and 45°F). The decreasing
softener efficiency level is also indicated.
Once softener regeneration has been performed, return to
the main view and press and hold
OK
1 2
for about 8 seconds
to cancel the message.
FILTER REPLACEMENT -
When the litre level on the
display is reached, a message is displayed for replacement
the filter. For both functions, an efficiency percentage is
displayed (Softener/Filter), decreasing from 100% to 0%.
Once the filter has been replaced, return to the main view
and press and hold
OK
1 2
for about 8 seconds to cancel the
message.
MAINTENANCE -
includes 5 settings for maintenance
parameters:
Max cycles - the number of cycles initially set: 40000.
Max days - the number of days initially set: 185.
No. cycles - the number of cycles until the next maintenance
activity.
No. days
- the number of days until the next maintenance
activity.
Reset - options are:
NO , countdown of the cycles and days until the next
maintenance activity
YES , the number of cycles (40,000) and days (185)
remaining are reset
OFF , all controls related to scheduled maintenance are
disabled and the “No. cycles” and “No. days” on the
maintenance panel are reset.
Once maintenance has been performed, in order to remove
the message a reset must be performed in technical mode.
Standard data
-
loads standard data: YES/NO.
WI-FI
-
See section “ Wi-Fi Configuration ” on the following
pages.
BLUETOOTH - see section “ Bluetooth Connection” on the
following pages.
BDS - see section “BDS Activation” on the following pages.
GRINDER CONTROL
The following parameters can be set:
- Enabled - MM1 - MM2
- Adjustment threshold - see section "Steps for Bluetooth
Coffee Machine-Grinder/Dispenser Communication” on
the following pages.
Weighing system - It activates/deactivates the weighing
system (if the "Scales Kit" is installed.
Log reset
-
clears faults (Wash log, Faults log and Water
change) that occurred and were stored by the machine:
YES/NO.