LA CASTELLAMONTE RNO 200, Инструкция по эксплуатации

Страница: 24 / 33

24
HOME FIRE SAFETY
Installation and use of the stove should be in accordance with the instructions of the
Manufacturer and the local rules of habitability.
•
When a flue pipe pass through a wall or ceiling particular methods of installation
should be applied (protection, thermal insulation, distance from heat sensitive
materials, etc)
•
NEVER CONNECT THE STOVE TO A CHIMNEY FLUE ALREADY IN USE FOR ANOTHER
DEVICE.
•
Keep away from the fireplace radiation area all combustible and flammable materials
(wood furniture, curtains, flammable liquids, etc…)
•
If nearby there are shells in combustible or sensitive to heat materials, an insulating
and not combustible protection must be interponed.
•
If the floor is made in combustible material, at the mouth of the fireplace a
protection made of incombustible material (i.e. inox steel, stone, glass) should be
placed – with a lateral extension of 203mm (8 inches) and a frontal extension of
406mm (16 inches). Under the chimney connector: 2 inches (51 mm) beyond each
side.
FLOOR PROTECTION REQUIREMENTS:
•
Use of a floor protector listed to UL 1618
•
Type 1 (ember) floor protector or ½” non-combustible material.
•
Extend beneath appliance and to the front, sides and rear as indicated in the diagram
below
•
The floor must be non-combustible or otherwise adequately protected from sparks
and falling embers.
•
A layer of thin brick or ceramic over a combustible is sufficient.
•
In US installations, it is necessary to install a floor protector of non-combustible
material a minimum of 16 inches (406 mm) in front of glass and 8 inches (203 mm) to
both sides of the fuel loading door. Open the door and measure 8 inches (203mm)
from the side edge of the opening in the face of the appliance.
see exception