manualshive.com logo in svg

LA Audio DPF3103, Руководство оператора, Страница: 35 / 46

Поделиться
Скачать
LA Audio DPF3103 Скачать руководство пользователя страница 35

35

9.0   REAL TIME ANALYSER OPTION

RELEASE
This parameter changes the release time of the display for both the

ANALYSER and CORRECTION screens. Peak release times can be varied

from 1.5s to 10s and 125ms to 1s for the average readout.

PREAMP
With this parameter selected use the 

DATA WHEEL

 to adjust the Microphone

preamplifier gain in 1dB steps from 0dB to +60dB.

With SOURCE selected to Micro and REFERENCE as dBSPL,

preamplifier gain adjust is not available.

MICRO
Access to Phantom power and response settings for the external RTA

microphone.

1.

PHANTOM
Use the 

DATA WHEEL

 to select between Phantom power on and off.

Phantom power is provided at +15V.

2.

RESPONSE

•

Use the

DATA WHEEL

 to select one of four possible microphone

setting memories.

•

Press

ENTER

 to confirm. Display changes to MIC page.

MIC menu

This menu is used to enter microphone sensitivity and frequency response values.

The top line of the display shows the microphone number, the frequency selected,

the gain at that frequency and sensitivity.

•

Press

RTA

 button twice to select RTA-SETTINGS 1

•

Use

 buttons to select MICRO:

•

Use

DATA WHEEL

 to select required microphone number

•

Press

ENTER

 to confirm. Display changes to 

MIC page

.

Pressing the

RTA

 button at this stage returns you to the SETTINGS 1

page.

FREQUENCY SELECT:
The frequency response of the microphone is represented by 31 faders,

similar to the GRAPHIC equaliser, with a range of +5 to -5dB in 0.25dB steps.

The response curve of the microphone can be entered using the faders and

then the analyser uses this data to compensate the overall frequency

response. Selecting a frequency and adjusting it's gain is similar to operating

the GRAPHIC equaliser. Please refer to Section 5.1.

Содержание DPF3103















































Отзывы:

Нет отзывов