manualshive.com logo in svg

LA Audio DPF3103, Руководство оператора, Страница: 10 / 46

Поделиться
Скачать
LA Audio DPF3103 Скачать руководство пользователя страница 10

10

3.0   WARRANTY

Your LA Audio DPF3103 has been manufactured to a high standard using quality

components. If correctly installed and operated the unit should give years of problem

free operation.

However in the event of a defect in material or workmanship causing failure of the unit

within 1 year of the date of original purchase we will agree to repair, or at our

discretion replace, any defective item without charge for labour or parts. To receive

service under this warranty it is necessary to return the unit to an LA Audio authorised

service centre or to the factory with a dated receipt as proof of purchase.  After repair

the unit will be returned to you free of charge.

Limitations:

This warranty does not cover damage resulting from accident or misuse. The

warranty is void unless repairs are carried out by an authorised service centre. The

warranty is void if the unit has been modified other than at the manufacturers

instruction. The warranty does not cover components which have a limited life, and

which are expected to be periodically replaced for optimal performance. We do not

warrant that the unit shall operate in any way other than as described in this manual.

Содержание DPF3103















































Отзывы:

Нет отзывов