13
4.0 DESCRIPTION OF CONTROLS
A copy of the recalled Program is now in the Scratch Pad and can be edited if
required.
If you have made any changes to the current program the word
EDIT
appears above
the Program window. If you now attempt to RECALL a Program a dialogue shows
'Current edit is not saved.....'.
•
Press
ESCAPE
to cancel RECALL routine
OR
•
Press
ENTER
to overwrite current edit.
COMPARING THE SCRATCH PAD WITH ANOTHER PROGRAM:
COMPARE is a non-destructive RECALL function that allows the current edit to be
compared with a previously stored Program. For example you recall Program 10,
make some changes to it and then want to compare this with the original Program 10
to see if the changes are better or not –
•
Press
COMPARE
, dialogue box shows Program number and name.
•
Use
DATA WHEEL
to select Program. Dialogue box shows selected Program
number and name.
•
Press
COMPARE
to toggle between the current edit and the selected
Program.
The current edit is indicated by the
EDIT
led.
•
Press
ESCAPE
to exit COMPARE mode.
You can of course RECALL a program and then COMPARE that with
another Program.
ACCESS:
ACCESS has two functions depending on whether the DPF3103 is being used in
stand-alone mode or as part of a networked system.
STAND ALONE APPLICATIONS
In the very unlikely event of a system crash switch off the
POWER
. Reset the unit
by holding the
ACCESS
button at the same time as switching the unit on.
Continue to hold the
ACCESS
button until '00' appears on the Program display.
NETWORKED DPF3103 APPLICATIONS
When used in a network i.e. with multiple slave units, pressing
ACCESS
on any
unit selects it for editing. This also assigns the controls and display of the Master
to that unit. Please refer to the digEQ Networking manual.