KeyRF – PC Remote Control
5/19/2007
4
L3 Systems
Connections Using USB Interface
1. Turn your computer on.
2. Connect one end of the supplied Mini-DIN cable to the purple connector on
the PS/2 to USB converter.
3. Connect the other end of the Mini-DIN cable to the “To Computer” connector
on the KeyRF receiver;
4. Plug the USB connector into a USB receptacle on the computer.
5. You should notice the computer detecting the USB connection. It may ask
you to press “OK” a few times. Windows 98 may prompt for you to put in the
Windows disk for a driver. Once this is done, you should be ready to use the
KeyRF. If you are using presentation software, run a presentation in “show”
mode and try advancing slides.
