REV5
For any questions please contact us at toll free (877) 482-2040 Mon-Fri 8 a.m. to 4:30 p.m. 4
135lb Stainless Steel Spreader Installation
Safety Cont…
2.3.1 Safety Equipment
When using or performing maintenance on the 135lb Stainless Steel Spreader, it is recommended
that the operator wear gloves and safety glasses.
2.3.2 Mounting and Dismounting
Two people using proper lifting techniques are required to mount and dismount the 135lb.
Stainless Steel Spreader. The risk of injury and/or damage to the unit is significantly increased if
only one person is performing this activity.
2.3.3 Spinner
Turn off the spinner before adjusting spread pattern settings. ALWAYS keep fingers, hands,
loose clothing, etc. clear of this area when it is in use.
2.3.4 Operation
Always scan the environment to ensure the product being spread does not come into contact with
other people and animals. Do not spread within 25 feet of people or animals. Follow all
guidelines provided in the Snowrator Owner's Manual.
2.4
MAINTENANCE
Follow all safety guidelines when performing maintenance on the 135lb Stainless Steel Spreader.
In order to ensure the 135lb. Stainless Steel Spreader is kept in optimum condition, perform the
following maintenance activities on a regular basis.
DO NOT USE WATER WHEN CLEANING HOPPER
Daily
•
Clean debris and product from Hopper daily USING COMPRESSED AIR ONLY, to
eliminate build up.
•
Check daily to make sure guides (4) are not damaged to allow the hopper door to slide
freely.
Weekly
•
Lubricate Hopper cables with Silicone Spray weekly.
2.5
RELATED DOCUMENTS
•
Snowrator Owner’s Manual
•
Installation Guide for 135lb Stainless Steel Spreader Conversion Kit (SRA-10020)
