background image

Save this manual for future reference.

IMPORTANT: Read and understand this manual before 
assembling, starting, or servicing heater. Improper use 
of heater can cause serious injury. Keep this manual for 
future reference.

MODELS:  CP070CK AND CP165DK

HEATER SIZE:  70,000 AND 165,000 BTU/HR

H.S.I. SERIES

TRADESMAN K70 & KI65

KEROSENE PORTABLE FORCED AIR HEATERS

(WITH BUILT-IN THERMOSTAT)

OWNER’S MANUAL

TABLE OF CONTENTS

Safety Informa ion ............................................... 2
Unpacking ........................................................... 3
Product Identification ........................................... 3
Fuels .................................................................... 4
Ventilation ............................................................ 4
Theory of Operation ............................................ 4
Assembly ............................................................. 5
Operation ............................................................. 5
Operation With Portable Generator ..................... 6
Storing, Transporting, or Shipping ....................... 6

Preventative Maintenance Schedule ................... 7
Troubleshooting ................................................... 7
Service Procedures ............................................. 9
Specifications .................................................... 14
Wiring Diagram .................................................. 15
Replacement Parts ............................................ 15
Technical Service .............................................. 15
Accessories ....................................................... 15
Illustrated Parts Breakdown and Parts List ....... 16
Warranty ..............................................Back Cover

Содержание Tradesman K70

























Отзывы: