114278-01C
3
18. Never move, handle, refuel, or service a hot,
operating, or plugged-in heater.
19. Never attach duct work to front or rear of
heater.
20. Never attach heater to external fuel tank.
21. Heaters used in the vicinity of tarpaulins,
canvas, or similar enclosure materials shall be
located a safe distance from such materials.
The recommended minimum safe distance is
10 feet (304.8 cm). It is further recommended
that these enclosure materials be of a fire
retardant nature. These enclosure materials
shall be securely fastened to prevent them
from igniting or from upsetting the heater due
to wind action.
22. Unplug heater when not in use.
23. Never block air inlet (rear) or air outlet (front)
of heater.
24.
Warning to New York City Residents
For Use Only At Construction Sites
in ac-
cordance with applicable NYC codes under
NYCFD certificate of approval #4803, #4899,
#4908, #4909, or #4934.
UNPACKING
1. Remove all packing items applied to heater
for shipment.
2. Remove all items from carton.
3. Check items for any shipping damage. If
heater is damaged, promptly inform dealer
where you bought heater.
SAFETY INFORMATION
Continued
Side Cover
Fuel
Cap/
Gauge
Hot Air Outlet
Side Cover
Fuel
Tank
Hot Air
Outlet
Fan Guard
Air Filter
End
Cover
Fuel Cap/Gauge
Ignition Control
Assembly (On
Inside of Side
Cover)
Ignition Control
Assembly (On Inside
of Side Cover)
Figure 1 - 70,000 Btu Model
Figure 2 - 165,000 Btu Model
Thermostat Knob
(Thermostat
Models Only)
Fuel
Tank
Fan Guard
Thermostat Knob
(Thermostat
Models Only)
ON/OFF Switch
with Light
ON/OFF Switch
with Light
PRODUCT
IDENTIFICATION
