L.B. White Tradesman CP100, Инструкция и руководство пользователя

Страница: 9 / 26

1. Always use approved pipe thread compound suitable
for use with propane gas on the threaded
connections.
2. Assemble the components together according to the
figure. This view is to show general assembly of the
components only. The regulator must always be
installed so its vent is always pointed downward when
attached to the propane gas supply.
3. Tighten all connections securely.
4. Check aall cconnections ffor ggas lleaks uusing aapproved
gas lleak ddetectors.
HOSE AND REGULATOR ASSEMBLY
FIG. 2
1. Fasten the carrying handle to the heater case top
using the four (4) sheet metal screws provided.
2. The handle may also be fastened to the side of the
case top for stacking purposes during storage.
FIG. 1
CARRYING HANDLE ASSEMBLY
CAUTION
■
Do not stack the heaters more than two high during
storage.
■
Tip-over may occur, causing personal injury or damage
to the heater.
ALTERNATE
HANDLE LOCATION
HANDLE
SCREW
8