![background image](http://html1.mh-extra.com/html/l-b-white/tradesman-170/tradesman-170_owners-manual-and-instructions_3242160016.webp)
IGNITION CONTROL
1.
Disconnect the LED wire harness from the circuit
board, if applicable.
2.
Remove the nuts securing the control to the side of
the heater’s base.. See Fig. 21.
3.
When replacing, do not touch or allow contact to the
control’s components, otherwise damage may occur.
FIG. 21
14
16
1.
Remove knob and thermostat mounting screws. See
Fig. 19.
2.
Remove the base bottom from the heater.
3.. Slide the thermostat sensing bulb from the cable tie
at the wiring harness. See Fig. 20.
FIG. 19
FIG. 20
THERMOSTAT
SCREWS
THERMOSTAT
BULB
NUT
LED WIRE
HARNESS
IGNITION
CABLE