100 POUND L.P. GAS
SUPPLY CYLINDER
OR GREATER
(REGULATOR VENT
MUST POINT DOWN)
TENT DRAPED OVER
DIFFUSER CHANNEL
DIFFUSER
TENT SIDE WALL
BLOWER
OUTLET
DIFFUSER
SLOTS
TAB
CHANNEL
1. Insert the tabs of the diffuser into the vertical slots at
the blower outlet. Push down on diffuser to secure
into place. See Fig. 9.
2. Tent side wall material may be layed within channel
of the dif fuser to give a finished look to the
installation. See below for typical installation.
FIG. 9
UNIT DIFFUSER ASSEMBLY
Optional Accessory
09389 (TS080) & 09396 (TS170)
END DIFFUSER ASSEMBLY
Optional Accessory 21177
1. Insert collar into duct. Tabs of collar must be facing
away from duct. See Fig. 10.
2. Wrap the duct clamp around duct and collar. Saddle
of clamp lays over duct coil. Connect clamp ends
together and tighten securely. See Fig. 10.
FIG. 10
3. Insert tabs of collar into slots at air inlet of diffuser.
Push down to lock in place.
4. Tent side wall material may be layed within channel
of the dif fuser to give a finished look to the
installation. See Fig. 11 for typical installation.
FIG. 11
12
TENT SIDE WALL
TENT DRAPED
WITHIN DIFFUSER
CHANNEL
OPTIONAL AIR DIFFUSER
MATERIAL DRAPED
WITHIN DIFFUSER
CHANNEL
CLAMP
Содержание Premier TS170
Страница 2: ......