![background image](http://html1.mh-extra.com/html/l-b-white/cp125ak/cp125ak_owners-manual-and-instructions_3136729016.webp)
FUEL FILTER
CLEAN OR REPLACE TWICE PER HEATING SEASON OR AS
NEEDED.
- Remove side cover screws using medium Phillips
screwdriver.
- Disconnect switch wires from power switch and remove
side cover.
- Pull fuel line off fuel filter neck.
- Turn fuel filter clockwise 90 degrees and pull to remove.
- Wash fuel filter with clean fuel and replace in tank.
- Attach fuel line to fuel filter neck.
- Reinstall side cover.
4
15
MAINTENANCE (cont.)
F
Figure 18 – Fuel Filter Replacement
Fuel Filter
Fuel Line
Switch Wires
Power Switch
Side Cover
Screw
PUMP PRESSURE ADJUSTMENT
- Start heater (See “Operation”, page 10).
- Allow motor to reach full speed.
- Adjust pressure (using flat blade screwdriver).
- Turn relief valve clockwise to increase pressure.
- Turn relief valve counterclockwise to decrease pressure.
- Set pump pressure to correct pressure for each model.
- Stop heater (see “Operation”, page 10).
NOTE: USE ONLY ORIGINAL EQUIPMENT REPLACEMENT
PARTS. Use of alternate or third party components will void
warranty and may cause an unsafe operating condition.
F
Figure 19 – Adjusting Pump Pressure
Pressure Gauge
Relief Valve
Flat blade
Screwdriver
Model
Pump Pressure
CP125AK
5.5 PSI
CP170AK
6.5 PSI
CP210AK 8.5
PSI
Содержание CP125AK
Страница 2: ......
Страница 18: ...4 17 WIRING DIAGRAM Figure 21 Wiring Diagram Models CP125AK CP170AK CP210AK CP125AK CP170AK CP210AK...
Страница 27: ......