L.B. White AD060, Инструкция и руководство пользователя

Страница: 30 / 80

Guardian Brood Heaters
www.lbwhite.com
Owner’s Manual • Guardian
30
Air Proving Switch
6DIHW\GHYLFHXVHGWRLQVXUHWKDWWKHSURSHUDLUÀRZ
is being achieved before the gas valve is opened.
Burner
Cast iron component used to channel gas and
provide an area at which the fuel may ignite.
%XUQHU2UL¿FH
Brass metering device used to feed gas to burner
DWDVSHFL¿FUDWH
Fan Housing
&KDPEHUXVHGIRUFRPSUHVVLQJDLUIRUHI¿FLHQWDLU
movement.
Fan Wheel
Component used in conjunction with the motor and
fan housing to pull the hot air from heater and blow
it into room for heating (also known as a “squirrel
cage”).
Gas Control Valve
A device which consists of a low pressure regulator
and electrical solenoids which are used for the con-
WURORIJDVÀRZWRWKHEXUQHUDVVHPEO\$IHDWXUHRI
the control is a built in gas shut off which is used to
isolate the brood heater from its gas supply when
servicing.
Gas Hose
Flexible connector used to convey gas from supply
line in building to brood heater.
Heat Chamber
0HWDO³¿UHER[´ZLWKLQWKHDSSOLDQFHWKDWSURYLGHV
DQDUHDZKHUHEXUQHUÀDPHPL[HVZLWKFRPEXVWLRQ
air thereby providing heat.
High Limit Switch
Safety device wired into the control system which is
used to break an electrical circuit to the gas control
valve in event of overheat situation.
Ignition Control Module
Controls the ignition sequence and operation of the
brood heater as well as monitoring the safety se-
vices. A major service feature is the board’s ability
WRGLDJQRVHFRPSRQHQWDQGÀDPHIDLOXUHE\PHDQV
of a diagnostic light located within the module. This
OLJKWZLOOSURYLGHDVSHFL¿FÀDVKSDWWHUQUHSHWLWLYHO\
depending on the type of componenet failure that
has occurred.
Brood Heater Component Function
Igniter/Flame Sensor Assembly
This assembly consists of two components
mounted adjacent on the same bracket.
-- Spark Igniter: Electrical ignition device
used on automatic ignition control systems.
Ignites gas by a spark.
)ODPH6HQVRU$OVRNQRZQDVDÀDPHURG
RUÀDPHSUREHWKLVGHYLFHZRUNVLQFRQ -
junction with the ignition module in proving
WKDWEXUQHUÀDPHKDVEHHQHVWDEOLVKHG
Motor
Electric device used to force preheated air
through the brood heater and to circulate heat
within a certain area. Converts electrical energy
into mechanical energy.
Regulator
The heart of any gas supply installation. Used to
deliver a working pressure to the appliance under
varying conditions in tank pressure.
Thermostat
Electrical device used as an automatic “on/off”
switch which will respond to changes in tempera-
ture in a certain area.
Transformer
This device is responsible for reducing a higher
incoming voltage (220 V.A.C.) to a lower outgo-
ing voltage. The lower voltage (24 V.A.C.) is
essential to operate the ignition control module.