L.B. White AD060, Инструкция и руководство пользователя

Страница: 14 / 80

Guardian Brood Heaters
www.lbwhite.com
Owner’s Manual • Guardian
14
Cleaning Instructions
WARNING
Fire, Burn, and Explosion Hazard
Ŷ7KLVEURRGKHDWHUFRQWDLQVHOHFWULFDODQGPH -
chanical components in the gas management,
VDIHW\DQGDLUÀRZV\VWHPV
Ŷ6XFKFRPSRQHQWVPD\EHFRPHLQRSHUDWLYHRU
fail due to dust, dirt, wear, aging, or the
corrosive atmosphere of an animal
FRQ¿QHPHQWEXLOGLQJ
Ŷ3HULRGLFFOHDQLQJDQGLQVSHFWLRQDVZHOODV
proper maintenance are essential to avoid
serious injury or property damage.
1. Before cleaning, shut off all gas supply valves
and disconnect electrical supply.
2. The brood heater should have dirt or dust
removed periodically:
D$IWHUHDFKÀRFNRUEHWZHHQEXLOGLQJUH
population, give the brood heater a general
cleaning using compressed air or a soft brush
on its interior and exterior. At this time, dust off
the motor case to prevent the motor from over-
heating and shutting the brood heater down.
b. At least once a year, give the brood heater a
thorough cleaning. At this time, remove the fan
and motor assembly and brush or blow off the
fan wheel, giving attention to the individual fan
blades. Additionally, make sure the burner air
inlet venturi ports and the throat of the casting
are free of dust accumulation and the area
between the heat chamber top and inside case
is also free of dust.
c. When washing with water, observe and obey
the Warning within these Cleaning Instruc-
tions. This same Warning is also supplied on
the brood heater.
WARNING
This brood heater may be washed only on the
external case assembly provided:
A. The brood heater is disconnected from the
electrical supply.
B. All access panels are securely closed.
C. Water spray nozzle shall not discharge within
1.83 m of the brood heater.
D. The water pressure does not exceed 3.1 BAR
for 10 seconds on each side of the brood
heater.
E. The brood heater is not reconnected to electri-
cal supply for a minimum of 1 hour or until the
brood heater is thoroughly dry.
Improper cleaning of the brood heater can cause
severe personal injury or property damage due to
water and/or cleaning solution:
1. In electrical components, connections and
wires causing electrical shock or component
failure.
2. On gas control components causing corrosion
ZKLFKFDQUHVXOWLQJDVOHDNVDQG¿UHRUH[SOR -
sion from the leak.
Clean internal components of the brood heater
with a soft, dry brush or cloth, or compressed air.