L-Acoustics A15 Focus Скачать руководство пользователя страница 6

Страница: 6 / 98

Safety

Risk of falling objects

Verify that no unattached items remain on the product or assembly.

Risk of tipping

Remove all rigging accessories before transporting a product or an assembly.

Take into account the wind effects on dynamic load.

When a loudspeaker assembly is deployed in an open air environment, wind can produce dynamic stress to the

rigging components and suspension points.
If the wind force exceeds 6 bft (Beaufort scale), lower down and/or secure the product or the assembly.

Intended use

This system is intended for use by trained personnel for professional applications.

As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right

to change the specications of its products and the content of its documents without prior

notice.

Check

www.l-acoustics.com

on a regular basis to download the latest document and software updates.

Read the maintenance section of this document before servicing the product.
Do not expose the product to extreme conditions.

Do not expose the product to rain or sea spray.
Do not expose the product to moisture (mist, steam, humidity, condensation…) or excessive heat (direct sun,

radiator…) for a long period of time.

Contact L-Acoustics for advanced maintenance.

Any unauthorized maintenance operation will void the product warranty.

A15 owner's manual (EN) version 1.2

Содержание A15 Focus



































































































Результаты поиска

Содержание A15 Focus

Отзывы:

Похожие инструкции для A15 Focus

Бренды по названию

Популярные бренды

L-Acoustics A15 Focus, Руководство пользователя

Результаты поиска

Содержание A15 Focus

Отзывы:

Похожие инструкции для A15 Focus

Бренды по названию

Популярные бренды