46
ELECTRICAL SYSTEM
General Information
The electrical system in your
recreational vehicle is designed using
both 120 volt AC (alternating current)
and 12 volt DC (direct current)
capabilities. All installations and
designs are built to comply with safety
requirements of ANSI standard A119.2,
National Electric Code and Canadian
Standards Association.
All coaches manufactured by KZ have
30 amp or optional 50 amp service pre-
wired into the breaker box.
Changes and Modifications
Any changes, alternations, additions, and/or modifications need to
be performed by qualified electrical technicians, using only approved
components which meet safety and code requirements. This
includes owners, dealers, etc. who desire to make changes. The
manufacturer is not responsible for any changes, or alterations,
made to the 120 AC system of the coach.
Power Cord 30 AMP
A 30 amp rated power cord is pre-wired into
your 120-volt AC breaker box. Open the hatch
door on the exterior of the coach. Pull cord out
and attach it to 120-volt power source.
Energy will enter through the main breaker and
is distributed through circuit breakers to the wall
receptacles and appliances. This power cord
will be approximately 26 to 28 feet in length.
Each cord has the correct gauge of wire to carry
the correct voltage to coach.
G
W
G
W
30-A, 125-V, 2-pole, 3-wire,
grounding type
G
Y
W
X
G
X
W
Y
50-A, 125/250-V, 3-pole, 4-wire,
grounding type
A 50 amp service is a 240-volt hook-up. There is no appliance or other
component requiring 240 volts in this coach. For more information , see the
section later in this chapter,
50 Amp (Optional).
CAUTION
!
PDF created with pdfFactory trial version