Multi-Image Splicing Processor
20
camera, laptop and information publication system.
VGA: Analog Video Signal (Video Graphics Array), a video transmission
standard introduced together by IBM in 1987 with PS/2 at the same time. VGA enjoys
high resolution, rapid display rate, rich color and is widely applied among color
displays. Its signal source is often desktop, laptop, VOD and Matrix.
CV: Composite video signal, also called composite video, which can pack all
signals together and transfer it as a whole. Its signal source is usually camera, DVD,
Cable Box, VOD and video matrix.
Q2: Please give a brief introduction of the connection method of graphics,
splicer, transmitting card, receiving card and LED.
A:
Connect graphics DVI (VGA) output port with splicer DVI-IN(VGA-IN)
input---output splicer DVI-OUT to transmitting card---connect transmitting card with
terminal receiving card of the back screen by network cable---connect receiving card
with each screen body with control and cover whole screen by cascade.
Q3: What is output resolution?
A:
Output resolution is pixel mode output by single port of splicer and the largest
control range of splicer output. Regular resolutions are: 1024*768, 1280*1024,
1600*1200 and 1920*1080, which are set with the same resolution mode of
transmitting card.
Q4: What is administrator password set in PC Software.
A:
There is no password and it’s allowed to enter into with just a click.
Q5: What are the reasons for failure of serial connection with the
application of serial splicing processor?
A:
Possible reasons are as follows:
1. Wrong selection of COM port. Just click “Confirm” and re-click “opening
serial port” key.
2. Occupation of serial port. Two or more software windows are not allowed to
be open simultaneously.
3. Failure of serial port line connection or damage of the line.
4. Damage of COM drive of the board or serial port.
