24 network port 2-in-1 controller product manual
1
Preface: Equipment Debugging Process
Open
“kystar”
video
processor
software→screen
configuration→open
window→select signal source→save mode →open “kystar control system”
software→expert debug→Receiving card debugging→screen connection→total save
parameter.
1
、
video processor setting
1
、
IP address
：
change PC IP and KSV24 on the same network segment
。
KLS24 default IP address
：
192.168.0.100
。
2
、
software connect
：
open PC software to debug
（
kystar software
），
connect device
，
select Ethernet to connect.
