KLS24manual
www.kystar.com.cn
20
7.mode save and call
7.5.1 Mode save
Click Save Mode in the main ribbon to eject the Save Mode Settings window, as shown in the
following image:
You can change the pattern as needed ID , that is, to save to the first few modes, you can also
change the schema name as needed. (excluding the pre-monitoring and hot-backup settings).
P
：
The device defaults to boot mode one data, so it is recommended to save the most commonly
used display mode data in the pattern 1 .
7.5.2 mode call
Click Left User Mode , click on the corresponding mode to invoke the display, in addition, if you
right-click user mode to change the mode name, make the pattern easier to remember and use.
As shown in the following illustration:
