KLS24manual
www.kystar.com.cn
15
In General, the software automatically recognizes COM port, users do not need to set, click
to confirm. However, in some cases the PC machine may have more than one com port at work, causing
software recognition errors, at this point you need to select com Port (Please try it in turn).
（
3
）
Establish communication
When software communicates, Select NET Connect , and click directly OK , if the connection
succeeds, a prompt box will pop up, as shown in the following figure, and click OK .
7.3 Out port settings
Click after device connection succeeds Primary Ribbon under Screen Configuration , pop-up
screen parameter setting interface , the six dotted field word box in the operation area
corresponds to the device output port (see left to right) one by one, the load on each outlet
and the outlet arrangement are set in the interface. As shown in the following illustration:
