11
3. CONNECTION AND DEFAULT SETTING
3-1. PROCEDURES FOR MEASUREMENTS
This section describes necessary operations to be conducted prior to the actual measurements.
Section 3-2
Connect the measuring units
Connect the measuring units to the EDX-10B.
↓
Section 3-3
Connect sensors
Connect various sensors to the measuring units.
Section 3-4
Connect the optional AC
adapter
Connect the optional AC adapter.
Ground the GND terminal.
↓
Section 3-5
Installing the USB device
driver
Install the USB device driver into the PC.
↓
Section 3-6
Connect the USB interface
Set the USB interface for connecting the PC.
↓
Chapter 4
Measure data
Preparation and measure data.
For details, see 4.
