background image

 

IM-A-1068 December, 2015 

 

 

 

 

 

INSTRUCTION MANUAL 

EDX-10B 

Compact Recording System 

(FOR HARDWARE) 

 

 

 

 

 

 

 

 

 

Thank you for purchasing KYOWA’s product EDX-10B Compact Recording 
System. 

Read this Instruction Manual carefully in order to make full use of the high 

performance capabilities of the product. 

Do not use the product in methods other than described in this Manual. 

This Manual only describes hardware operation of the EDX-10B. For the 

Dynamic Data Recording Software DCS-100A, see the DCS-100A Instruction 

Manual (For EDX-10A/B Operation). 

 

 

 

 

 

 

 

 

 

 

 

 

 

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or 

other countries. 

Generally, company names and trade names described in this Instruction Manual are trademarks or registered trademarks of 

the companies. 

This Instruction Manual may not be copied or reproduced, in whole or part, without consent of KYOWA. 

Copyright © Kyowa Electronic Instruments Co., Ltd. All rights reserved. 

The contents of the Instruction Manual are subjected to change without prior notice. 

We assume no responsibility whatever for any damage resulting from the use of this product. 

 

 

Содержание EDX-10B




























Отзывы: