10
1) "POWER" switch
System power is turned OFF when this switch is slid to the "
{
"
position or ON when slid to the "|" position. When the EDS-400A
power is ON, the “POWER” switch lights up green.
2) "SYNC" lamp
This lamp indicates the status of synchronization.
Steady green light:
The system is set as the master.
Steady orange light: The system is set as a slave and is not
receiving the sync signal.
Flashing orange light: The system is set as a slave and is
receiving the sync signal.
3) "MEAS." lamp
This lamp indicates the status of data recording.
Steady green light:
Master – Recording data
Slave – Waiting for the sync signal
Flashing green light: Master – Waiting to be triggered
Steady red light:
The lamp remains lit in red after a start
signal is received until recording data is
actually started.
Flashing red light:
A data recording error has occurred.
Off:
Data recording is stopped.
4)
"1," "2," "3" and "4" lamps
These lamps indicate the zero-suppression setting status and the
input status of each channel.
Steady green light: The result of zero suppression is normal.
Steady orange light: A signal exceeding the set range was
input during recording data. The lamp
will remain lit in orange until recording
data is started again or zero suppression
is implemented.
Flashing red light:
Result of zero suppression is abnormal.
Off:
The range setting or zero suppression is
set OFF.
Turns off momentarily: Zero suppression is in progress.
5) "START/STOP" switch
Pressing this switch while recording data is stopped will start
recording.
Pressing it during recording will stop recording.
6) "ZERO" switch
Pressing this switch will implement zero suppression on the
channels for which zero suppression is enabled. This switch is
invalid during recording.
7) "READ" switch
To set the conditions for recording, place in the card slot 10) a CF
card containing recording conditions and then press this switch.
The EDS-450A is used only as a master unit and not as a slave unit.
NOTE
Содержание EDS-400A
