manualshive.com logo in svg

Kyoto Kagaku M99, Инструкция по эксплуатации, Страница: 14 / 16

Поделиться
Скачать
Kyoto Kagaku M99 Скачать руководство пользователя страница 14

２

1

2

３

Cleaning

①

The skin covers

④

Take off the radius base

1. Take off the radius base from the simulator base.

Do not use any organic solvent or alcohol on any parts of the simulator.
When the simulator gets heavily stained, use soap or neutral detergent.

1. Wipe off the simulated blood inside of the skin

 

covers with a soft

 

cloth.

②

The simulator base

1.

Wipe off the simulated blood on the simulator base,

 especially around

the puncture unit holder, with a piece soft cloth.

③

Outside of the circulation pump

1.

Wipe the surface of the circulation pump with a damp

cloth.

④

Inside of the circulation pump

1.

Periodical cleaning of  the inside of the pump

is recommended. This process is to be done before
disassembling the unit.

1)

 Stop the circulation pump.

2)

Disconnect the tube connector marked 'OUT' (red) on

 the simulator base.

3)

Fill the syringe with clear water and connect the syringe

  tip to the free end of the 

tube. 

4)

Inject the water to the tube until the injected water flow

 into the jar. (approx. 20cc.)

5)

Connect the tube back to the simulator base and discharge

 water by following

the instruction on page 

10

.

Disassemb

l

e the hand-wrist 

model and puncture unit
Cleaning

Disassemble the hand-wrist model and puncture unit

After training

Caution

Sliding the cover of AC adapter, pull it out.

Cover

4 

AC Adapter

Содержание M99

















Отзывы:

Нет отзывов