Setting up the wrist model and
puncture unit
Preparation
③
Set the skin cover
3. Place the tube in the gutter on the radius base, connect
the other end of the tube to the black socket and lock it
by turning clockwise until it clicks.
If the lock is incomplete, the tube may come off
and simulated blood may leak.
1. Cover the radius base with the inner skin cover, noting the
direction so that the artery tube is inserted in the slits on
the walls of the skin cover.
2. Likewise, cover the puncture area with the outer skin
cover. Make sure the all edges of the skin cover are
placed inside of the walls of the puncture unit holder.
Attention
Make sure that the artery tube is properly
placed in the slits on the skin cover
without being flattened.
Attention
④
Set up the hand-wrist model
Put the hand-wrist model on the simulator base.
Be careful not to catch the artery tube in between.
9
３
Setting up the wrist model and puncture unit