KYORITSU KEW 4106, Инструкция по эксплуатации

Страница: 17 / 48

13
6. Marks and Messages displayed on the LCD
Following marks and messages are displayed while measurements.
Marks and Messages Details
Battery voltage is low. Replace the batteries.
This mark is being displayed during a measurement.
Measuring range for the selected Range is
exceeded. In case of Ust measurements, 50V or
more is detected.
Failed to make successful measurements
Rk is exceeded the limit value; exceeding 2Ω at 2
Ω Range and exceeding 9Ω at 20Ω Range.
Setting for Rk can be made at 20Ω or lower
Setting for Rk can be made only at 2w, 3w, 4w
measurements.
Ust is Regulated value or more.
Rh and Rs values exceed the allowable range.
Correct results might not be obtained.
No saved data exists.
Memory is full. No more data can saved in.
A confirmation message before deleting the
selected item.
A confirmation message before deleting the all
items.
All items have been deleted.
Nxxx is a Memory No., and the left message
saying 95 data have been stored. (Displayed at
the Data Review Screen.)
Indicating the measured result is saved with
Memory No. N003 .
The character S stands for Site . Selectable
from 000 to 999.
Data is successfully saved.