background image

1

Thank you for purchasing our Model KEW1051, KEW1052 Digital Multimeter.

This instruction manual describes the specifications and handling precaution for this Digital 

Multimeter.

Before using this Digital Multimeter, thoroughly read this manual to get a clear understanding 

on proper use.

Always observe the following instructions.

Failure  to  do  so  may  impair  the  protection  provided  by  the  instrument  and  probes,  and  may 

result in electrical shock or other dangers that may lead to serious injury or the loss of life.

KYORITSU  is  in  no  way  liable  for  any  damage  resulting  from  the  user’s  mishandling  of  the 

product.

For safe use of this product, the following safety symbols are used on the product:

n

  About This Manual

•  Every effort has been made to ensure accuracy in the preparation of this manual.

  However,  should  any  errors  or  omissions  come  to  the  attention  of  the  user,  please  contact 

KYORITSU.

•  The contents of this manual are subject to change without prior notice because of 

improvement in performance or function.

•  All rights reserved. No part of this manual may be reproduced in any from without 

KYORITSU's written permission.

Содержание KEW 1051









































Отзывы: