background image

2

Regarding Safe Use of This Product

For safe use of this product, the following safety symbols are used on the product and manual:

W ARNIN G 

 

This indicates that the operator must refer to an explanation in the 

instruction manual in order to avoid the risk of serious injury or 

the loss of life.

CAUTION 

 

This indicates that the operator must refer to an explanation in the 

instruction manual in order to avoid the risk of injury or damage to 

the product.

Note

 

This indicates information that is essential for handling the instrument 

or should be noted in order to familiarize yourself with the 

instrument’s operating procedures and/or functions.

 

Danger! Handle with Care 

This symbol indicates that the operator must refer to an 

explanation in the instruction manual in order to avoid risk of 

injury or death of personnel or damage to the instrument.

 

Double Insulation 

This symbol indicates double insulation or reinforced insulation.

 

Direct Current 

This symbol indicates DC voltage/current.

 

Alternating Current 

This symbol indicates AC voltage/current.

 

DC/AC 

This symbol indicates AC and DC.

 

Fuse 

This symbol indicates a fuse.

 

Battery 

This symbol indicates a battery.

 

Ground 

This symbol indicates ground (earth).

Содержание KEW 1051









































Отзывы: