Kyokuyo Electric KST-1000-W, Руководство по эксплуатации

Страница: 29 / 78

27
Reset all settings
Reset all settings back to the factory settings.
If you make a full reset of the tuner, the version of the firmware and all the settings
in the tuner are returned to the default settings (original factory settings). Therefore,
when the tuner does not work properly, please try to operate in accordance with
Trouble shooting guide in this manual (P.29).
However if you wish to make a full reset of the tuner and return to the original
factory settings
1. Shutdown the tuner
Press and hold on the remote control for more than 5 seconds when the
power is ON. If you cannot shutdown the tuner, disconnect the power cord when
the power is OFF, and then reconnect it. You will find the red light on.
2. Press and hold the reset button and the power button simultaneously.
Please keep pressing the reset button until the power light starts blinking red and
green.
- Reset button is on the back of the tuner.
- This process takes about 4 minutes.
3. The reset process will be completed when you find the green light on. About 20
seconds later, the initial setup process will start automatically.