Kyokuyo Electric KST-1000-W, Руководство по эксплуатации

Страница: 17 / 78

15
Region selection and Channel scan
Precautions for viewing terrestrial broadcasting
1.
Check whether terrestrial digital broadcasting has been started in the region
(country) where the tuner will be used.
This product has a receiver for terrestrial digital broadcasts, and does not allow
TV viewing in regions (countries) where there is no terrestrial digital broadcasting.
In addition, it cannot receive terrestrial analog broadcasts. However, if terrestrial
digital broadcasting is not provided in the area where the tuner is used, there is
a possibility that analog TV is provided. If you have an analog TV, set up a pass-
through connection between this product and analog TV, and try viewing with the
analog TV.
Even in countries where terrestrial digital TV broadcasting has been started, it may
be impossible to view digital TV if the current location (anchor point) is distant from
the broadcasting station, or if it is impossible to obtain signal strength sufficient for
TV viewing at unfavorable locations such as those where noise has an effect on TV
signals.
2.
Standards for terrestrial digital broadcasting are not uniform throughout the
world, and thus before searching for channels which can be viewed (channel
scan),it is necessary to specify the broadcast standard for channel scanning.
*If channel scan is performed with a different broadcast standard, channels will
not be detected.
Broadcasting standards are established by regions (countries). With this product, it
is possible to perform channel scan with either of the following:
①
Scanning by designating a region (country) or broadcasting standard
②
Sequential scanning of all broadcasting standards
Setting