Kyocera TASKalfa 250ci, Руководство по эксплуатации

Страница: 424 / 488

Management
11-12 OPERATION GUIDE
5
Press [Change] of Group ID .
6
Enter the group ID and press [OK].
7
Press [Change] of Group Name .
8
Enter the group name and press [OK].
NOTE:
Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
9
Press [Change] of Access Level .
10
Select the user access privilege and press [OK].
11
Press [Change] of Print Restr. (B & W) .
12
Select [Reject Usage] or [Off] and press [OK].
13
Follow steps 11 and 12 above to set Print Restr.
(Full Color) , Copy Restr. (B & W) , Copy Restr.
(SingleColor) , Copy Restr. (Full Color) , Send
Restriction , FAX TX Restriction , Storing Restr. in
Box , and Storing Restr. in Memory .
14
Press [Register] to add a new group on the group
list.
Obtain Network User Property
Set the required information to obtain the network user property from the LDAP server.
NOTE:
To obtain the network user property from the LDAP server, [Network Authentication] must be selected
for the authentication method in Enabling/Disabling User Login Administration on page 11-2 .
The table below explains the required information to be registered.Use the procedure below.
Group:xxx
Group ID:
Copy Restriction:
Access Level:
Register
Copy Restriction (Color):
Print Restriction:
Print Restriction (Color):
Cancel
Change
Group Name:
2008/10/10 10:10
Status
Change
Change
Change
Copy Restr. (Full Color):
Change
Change Change
Change
Send Restriction: Change
1/2
Item Description
Server Name*
1
Enter the LDAP server name or the IP address (up to 64 characters).
Port Set the LDAP port number or use the default port 389.
Name 1*
2
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
Name 2*
3
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
E-mail Address*
4
Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up
to 32 characters).
Search Timeout Set the amount of time to wait before time-out in seconds (from 5 to 255
seconds).