Messages (cont.)
70
Messages
4-2. Setting the Reply Path to the Service Centre
("Reply path")
The "Reply path" function turns on or off the Reply path setting request to
the Service Centre.
1.
Use
/
to select "Reply path", then press
.
The setting for automatic switching is displayed. The current setting is
indicated by
●
.
ON
Requests the Service Centre to set a Reply path.
OFF
Does not request the Service Centre to set a Reply path.
2.
Use
/
to select the desired option, then press
.
The screen returns to the Settings Menu.
OK
OK
4-3. Setting the Term of Validity of Untransmitted Text Mails
("Valid period")
The "Valid period" function lets you set the term of validity of any Text
mails waiting at the Service Centre which have not been transmitted.
1.
Use
/
to select "Valid period", then press
.
The setting for automatic switching is displayed. The current setting is
indicated by
●
.
One hour
Two hours
One day
Two days
One week (Default)
Four weeks
Six months
2.
Use
/
to select the desired option, then press
.
The screen returns to the Settings Menu.
OK
OK
4-4. Setting the Text Mail Receiver Protocol
("MSG type")
The "Msg type" function lets you set the protocol used by the
communications terminal at the Text mail destination.
1.
Use
/
to select "Msg type", then press
.
The supported protocols are listed. The current setting is indicated by
●
.
Text (Default)
A GSM Mobile Station
Telex
Telex or teletext reduced to telex format
G3 telefax
Group3 telefax
G4 telefax
Group4 telefax
Voice
(i.e., conversion to speech)
ERMES
European Radio Messaging System
Paging
National Paging System
X.400
Any public X.400-based message handling system
Internet Electronic Mail
2.
Use
/
to select the desired option, then press
.
The screen returns to the Settings Menu.
OK
OK