53
Safety Precautions
●
Environment for easily generating dew formation on
the camera lens or inside of the display
In the following cases, such as large temperature
change or high humidity, camera lens or inside
of the display mist over because of usage
environment.
・ Bring the product from a high temperature land
into a low temperature water
・ Bring the product from a cold place into a warm
place such as an indoor
・ Open/close the card slot cover in a high humidity
environment
●
How to reduce condensation
Do not use the product in places that get hot
and humid, and sandy or dusty places. Leave the
product with the card slot cover opened for a while
until the condensation is cleared when the ambient
temperature is held constant.
●
While writing/reading data to/from a microSD
memory card, do not subject the product to
vibration or impact, or turn off the power. Doing so
may cause data loss or malfunction.
●
Do not cover the sensor with your finger or put a
sticker on it. May hinder the sensor from detecting
the ambient light level and functioning correctly.
●
Keep the card slot cover closed when using the
product. Using the product with the cover opened
can allow dust, liquid, etc. to enter and may cause
malfunction.
●
Do not allow liquids, metal objects, or other foreign
objects to get inside of the au IC card or microSD
memory card slot. Doing so may cause malfunction.
●
Do not give strong impact on the product such as
dropping, throwing, stomping. Doing so may cause
malfunction.
●
Do not place the product directly on sand at a
beach, etc. If sand or other small particles get
inside the mouthpiece or speaker, etc., it may cause
the volume to drop or malfunction.
■ Touch Panel
●
Any soiling on the display surface may cause false
operation. Wipe the display with a soft, dry cloth.
●
Putting stickers or sheets (e.g. commercially
available protective films, peep prevention sheets)
on the display might cause incorrect operation of
the touch panel.
●
When carrying the product in your bag, etc., take
care not to put the touch panel close to metals or
other conductive materials, as it might cause false
operation of the touch panel.
